Using a Ortho feed? Insert the right voltage to power both LNB’s properly for maximum signal. No more starving your vertical polarity with 14 volts. The Rainier 4×8 switch provides the logic control needed for up to 8 receivers. It sends 18 volts to up to 4 LNB’s for c or C/ku operation. Logic control accepts 14 /18 switching input for 0k or 22k tone operation. Use our D9865 and Linkbox or other FTA receivers at the same time. Includes 4X8 multiswitch, AC /DC linear power supply module, and F to F adapter. Order today.
Did You Know? If you’re using a FTA receiver it only sends 14 volts to the vertical LNB. This low voltage will not allow your LNB to operate well and receive signals properly. Fix it with Rainier’s 4X8 multiswitch solution.
Did You Know? That LNBF’s dont give the same performance as dedicated LNB’s with an ortho feedhorn. Dump the lossy LNBF today and see the difference.
See our Ortho Feeds and LNB’s Here
-Necessary Add On For All FTA Receivers Using Ortho Feed.
-Can be used with the Rainier Cisco D9865 receiver for improved performance.
-Use with our Linkbox 500i FTA/IP receiver.
-Increase performance of your receiver.
-Lock unlockable signals.
-Provides proper 18 volts to each LNB connected.
-Receive weak signals.
-Connect up to 8 receivers using the same dish.
-Powers up to 4 LNB’s, C & Ku.
-Covers 950-2150 MHz.
Rainier Satellite is pleased to announce a new product in our lineup for 2022. The Mighty Mini ED. This replaces all legacy SD and HD units. Whats special about our new model. It packs more power (amperage) in its mini design to move up to 12 foot mesh dishes effortlessly. Its the highest amperage consumer dish positioner on the market today. Forget those weak V boxes. Our Mighty Mini runs rings around them.
Check out it’s Features:
- New Powerful 3.6 Amp Maximum Current moves up to 12 foot mesh dishes.
- New Extra Duty Model (MMBDT-EX)
- Power Punch for fast startup.
- Powerful 36 Volts DC delivered to M1 & M2 terminals.
- 10 Amp 110 VDC rated dual motor relays.
- Compact Design. (sits next to our D9865 receivers)
- Super Simple Installation Setup.
- One Button Direct Satellite Tuning.
- 32 Direct Entry Satellite positions.
- Non-volatile memory.
- Compatible with any Actuator including H to H using a reed, hall, or optical sensor.
- 5 volt rear terminal for optical sensor.
- Electronic Overload Protection.
- Anti-miscounting design.
- Large “easy to read” Green LED Display.
- LED bars show dish movement direction.
- Full Size Remote and buttons, 37 Keys. Easy to use.
- Countdown memory clear reset function.
- Full Function IR remote control.
- Dimensions 3.75″ L, 11.0″ D, 3.75″ H.
- AC Voltage in, 115v 60 Hz.
Works Flawlessly with Rainier and FTA systems.
This SALE ENDS February 8th, 2022. Hurry only a few left at this unheard of LOW LOW price of $95.99 with Free Fed Ex Shipping!
Works flawlessly with Rainier Subscription or FTA Systems!
TOMORROW MAY BE TOO LATE!