Using a Ortho feed? Insert the right voltage to power both LNB’s properly for maximum signal. No more starving your vertical polarity with 14 volts. The Rainier 4×8 switch provides the logic control needed for up to 8 receivers. It sends 18 volts to up to 4 LNB’s for c or C/ku operation. Logic control accepts 14 /18 switching input for 0k or 22k tone operation. Use our D9865 and Linkbox or other FTA receivers at the same time. Includes 4X8 multiswitch, AC /DC linear power supply module, and F to F adapter. Order today.
Did You Know? If you’re using a FTA receiver it only sends 14 volts to the vertical LNB. This low voltage will not allow your LNB to operate well and receive signals properly. Fix it with Rainier’s 4X8 multiswitch solution.
Did You Know? That LNBF’s dont give the same performance as dedicated LNB’s with an ortho feedhorn. Dump the lossy LNBF today and see the difference.
See our Ortho Feeds and LNB’s Here
-Necessary Add On For All FTA Receivers Using Ortho Feed.
-Can be used with the Rainier Cisco D9865 receiver for improved performance.
-Use with our Linkbox 500i FTA/IP receiver.
-Increase performance of your receiver.
-Lock unlockable signals.
-Provides proper 18 volts to each LNB connected.
-Receive weak signals.
-Connect up to 8 receivers using the same dish.
-Powers up to 4 LNB’s, C & Ku.
-Covers 950-2150 MHz.