Belden Means Quality and Rainier Now Carries the Best Cables for your Dish

– Premium Belden Coax
– Actuator Control Wire

  • Dual Solid Copper Center RG-6 Coax
  • Ultra Low Loss – 4K Ready – Belden Brand
  • 4.5 GHZ Swept Tested. The Ultimate!
  • Actuator 2 motor and 2 shielded sensor wires.

Get the Signal with maximum picture resolution with Rainiers Premium Quality Dual RG-6/U Type Precision Low Loss Serial Digital Video Coax by Belden. SOLID COPPER CENTER CORE (not steel clad center, copper coated like bargain brands) for maximum signal transfer. Better overall reception with lower BER. 4K Ready. Cables Made in USA. Works great with the Rainier Cisco D9865H Receiver.

Premium Actuator Control Cable has 18 AWG Stranded Motor Pair + 22 AWG Stranded Shielded Pair for sensor. Get accurate reed sensor counting using our premium cable. Works great with the Pansat AP-600 Dish controller.

Cables also available separately.

Get it only at Rainier’s Webstore

 

Get it All Electronics Super Package

Rainier’s Exclusive PURE Master HD is now easier than ever!

Rainier Satellite to proud to announce we will be releasing… The Get it All Electronics Super Package in our webstore soon. This super pack will include our Exclusive DH Rainier 9 foot dish with tuned feed. 2 Norsat PLL LNB’s. Pansat AP-600  Dish Mover. 24 inch actuator arm. And of course our famous D9865H HD Satellite receiver for subscription programming.  We will also be carrying  high quality Belden full copper center conductor RG6-U coax and actuator control cable. These can be bought by the foot to custom tailor it to your install.  All you will need to supply is the pole and concrete.  Get all the electronics  in one place and simplify your C band experience with High Quality products only from Rainier Satellite.

 

Great Price for Rainier Edition DH High Quality C band Dish

Image1GET THE SIGNAL WITH THIS HIGH QUALITY C BAND 9 FT ANTENNA

Rainier Satellite Special Performance Edition.

Get the signal in all weather with our high quality built 2.7 meter, Performance Edition 9 foot Spun Aluminum, 4 section Satellite Dish. Made in the U.S.A. by well known DH Antenna. Includes polar mount and ortho factory tuned C band feedhorn for maximum gain. Accurate 9 foot solid reflector with tuned feed offers gain of 10 foot mesh antenna’s at a smaller size. More HOA and neighbor friendly. Detailed instructions included. Installation helpline phone support direct with DH included with your purchase.

Designed with 8 precision cut templates as ribs.

A computer controlled machine is used to manufacture the ribs allowing them to have the exact parabolic curve of the antenna. The 8 generated ribs, also referred to as templates, are secured to the antenna prior to cutting the antenna into 4 sections. The templates allow for the antenna to be re-assembled and perform as a 1 pc. Extensive testing has been done on this system and our data shows no difference from a 1pc to the 4pc. Templates hold the antenna in shape so you are assured of a perfect antenna each time.

Our price:   $ 1,259.99

Plus Shipping.
Common carrier low cost shipping,
depending on zip code low as $300.00

  • C Band Measured Gain @ 4 Ghz.: 39.6 db
  • KU Gain @ 12 Ghz.: 49.2 db
  • F/D: .33 – F/L 36″
  • 94 lbs
  • Hail resistant surface
  • Beamwidth (3.0 db) = 0.5 degrees (E-plane) 0.5 degrees (H-plane)
  • Beamwidth (10.0 db) = 0.9 degrees (E-plane) 0.9 degrees (H-plane)
  • First Sidelobe = 1.2 degrees
  • All Sidelobes > -26 db
  • Thickness: .090
  • Wind Force @ 60° @ 100 MPH: 3050 lbs.
  • 3.5″ OD pipe required. 5.5″ pipe mount optional. (extra cost)

Order Today

 

 

The Blaze TV Coming to Rainier Satellite.

theblaze_logo_2x

The Blaze TV is coming to Rainier Satellite. You can catch a free glimpse of The Blaze as it is currently in FreeVue mode. It will be encrypting soon and the Pure HD signal will be available only to Rainier Satellite Subscribers.  To tune The Blaze go to the Pivot TV preset on your D9865 receiver and select channel 4.

Tired of FTA Boxes that don’t work right? Throwing money away time after time?

Are you one of the FTA box users that seem to  get a receiver that never works right on all or some channels no matter what you do?

Does your box exhibit these symptoms? Video stuttering , lockup , or freeze? Audio missing, or out of sync (lipsync)? Channel refuse to scan in? Box runs hot or reboots? Box dies prematurely and dealer offers little or no help? Tried updating firmware and it don’t update or bricks the box.

Does your dealer promise that these problems will be rectified in the next firmware release? Does the next firmware release cause same or new problems? Does your dealer announce there will be no more updates and your now stuck with that problematic box?

Does your dealer come out with a new model and promise the new model will fix all previous problems with his last model and do so much more, but never does?

Have you lived through all this time and time again? Are you tired of it?

If so then Rainier can provide the solution.  Our Cisco D9865 model receiver does not have any of these problem that all other FTA boxes exhibit.

Let me tell you, I like everyone else have been through the problematic FTA merry go round for years just like you reading this now and was disgusted with it all. Once I got the Cisco D9865 these problems stopped. It just worked and worked well! I have been using the Cisco for well over 2 years now and very satisfied. The Cisco also offers the added benefit of Subscription C band Master TV that no FTA box can offer. More on the Cisco later.

So why does this happen with typical FTA boxes A-Z?

All the FTA boxes the FTA dealers sell  are originally intended for use in a foreign country.  They are not designed for North America’s TV signals and standards no matter what they may tell you. Your typical FTA dealer/seller looks for a product that will meet his needs and  clients price range. One big restriction the FTA dealer faces is cost. He knows his clients will not spend the money to do it right.  So he must settle. (This is where the problem begins) FTA dealers are small garage based businesses that dont have the money to invest in a ground up product built specifically for the North American Market to his specifications. So the FTA dealer/seller decides on this or that foreign pre made box depending on what will seem to work for him. He then brings it to market and begins sales. After a while his clients complain that this isn’t  working right or that isn’t right. So he contacts the manufacturer or has someone write patches to the firmware to try to solve  the issues. In the meantime it usually screws up the previous code and a new problem arises. So its back to trying to fix that problem and many times still trying to fix the original problem. Once again he releases an update and the scenario keeps repeating itself. After the dealer/seller exhausts all his resources and the manufacturer / coder says it cannot be fixed no matter what, he drops support for the box. And you the consumer is left out in the cold.

After support is dropped the dealer /seller starts this game over again looking for another FTA box to fill the sales void. He still has the financial restraints to work with so the scenario  repeats itself once again and the consumer loses again. Round and round the cycle goes.

Now back to the Cisco D9865. Why is it different? One of the things many overlook is that the Cisco D9865 is designed for the North American TV Market. It uses the same engine that is used in the commercial receivers/decoders used in your typical Cable and Satellite headend to deliver those services. It’s firmware has already been designed to work right and must no matter what it receives. Any future updates are done automatically over the satellite, so you don’t risk the chance of bricking the receiver  with USB or internet update.  Cost factor (the failure of typical FTA boxes) was not an issue when it was done so it is done right. But there is a tradeoff – it costs more than your typical FTA receiver upfront. Quality does not come free as many may keep believing. You need to ask yourself this question? Do I want to keep playing this FTA low price game buying your typical $100-$400 FTA receiver over and over just to replace it in 6 months to a year? OR Do I want to spend a little more once and be done with this merry go round once and for all? If you add up what you spent on many FTA bug-ridden receivers over a few years you can very easily own the Cisco D9865 and have change left over. Its your money how do you choose to spend it?

Short on cash? You can pay it off over time with our financing through Paypal Credit.

I hope this clears up what really happens behind the scenes and why that typical FTA box keeps giving you fits.

If your ready to upgrade and finally be happy, get the Cisco D9865 and sit back and enjoy the TV you want to watch for a change without frustration.

Cisco D9865D Receiver

More on the Cisco D9865 can be found HERE

 

Rainier Satellite 2.7 meter dish 9 ft more bang for less buck’s

Rainier Satellite’s new C band dish offering has some exciting news. Our DH 9 ft dish Special Edition is optimized for the gain of a 10 foot at a 9 foot size. This is accomplished by a special tuned reflector and feed combo. This gets all those weaker signals. Being a 9 foot size has other advantages too. Shipping is done using common carrier, no motor freighting needed. This keeps shipping cost low. 9 foot also means its accepted in area’s where a 10 foot or larger may have a problem due to restrictive covenants.

With that said the following is being added to protect the consumer from unscrupulous individuals masquerading as businessmen.

Rainier at this time will address a rumor being started by an unscrupulous website selling nothing but lies to steal your dollars. This website wants you to send CASH money to a PO box in Iceland for their so called fictitious products. They do not accept Paypal or credit cards which offer buyer protection like Rainier does.  (We will not post the website name due to the nature of their illegal activities)

This website uses shill posters to start conversations and promote the illegal activities. This one post was brought to Rainier Satellites attention. In this post a shill says they contacted Rainier Satellite for a quote, and were given the following figures. We know this is not true since we have all contact correspondence logs. We will now expose their lies.

LIES

One can see that this fake information they post is nothing more than LIE after LIE. How could one even begin to trust anything said on this website by its owner or the shills?  We recommend you steer far away from this place that promotes nothing but LIE after LIE. And other places like that.

This information is being added to our news section  to protect the public. Only buy from sources that promote legal activities, have business licenses and a physical location. Not a PO Box as an address. Furthermore only buy with Paypal or credit card which protects the buyer if there is a problem.

 

 

 

 

C Band Satellite Dishes Now Available from Rainier Satellite

Rainier Satellite is proud to announce we’re now offering a high quality C / ku 2.7 meter 4 panel Satellite Dish by well known DH Antenna.

Get the signal in all weather with our high quality built 2.7 meter, 9 foot Aluminum, 4 section Satellite Dish. Made in the U.S.A. by well known DH Antenna. Includes polar mount and ortho factory tuned C band feedhorn for maximum gain. Accurate 9 foot solid reflector with tuned feed offers gain of 10 foot mesh antenna’s at a smaller size. More HOA and neighbor friendly. Detailed instructions included. Installation helpline phone support direct with DH included with your purchase.

Quality Packed and Shipped – Easy Assembly

MADE IN THE USA

Get all the information here