Satellite Dishes UP TO 16.4 feet Available! IN STOCK!

Be is small or large Rainier’s got you covered. C band satellite dishes are hard to come by these days for some. Those who sourced cheap low cost dishes from China are no more. Where does that leave those who need a big dish such as TV, Radio Stations, backyard dish subscribers, and hobbyists. Well stop looking, Rainier has sizes between 9 and 16.4 feet available made right here in the USA.

Stop looking endlessly, no supply chain issues with Rainier. Come to the leader in Satellite communication products and services, Rainier Satellite LLC. founded in 2013.

Need a C band Dish? Rainier has them in stock.

Looking for a new high quality c band dish for home or commercial use? Look no further Rainier’s got them. Our dishes are made in the good old USA in Wisconsin. We offer 9 foot dishes or larger to meet your needs. Since our dishes are made in the USA we have no shortages due to the Chinavirus.

Many dealers who use to sell dishes and other satellite accessories have dried up. But not at Rainier. We’re here for you today and tomorrow. We are dedicated to c band.

Check out our flagship 9 foot dish that performs like a 10.

Rainier Satellite Special Performance Edition.

INCLUDED

  • 9 foot, 4 section satellite dish, 39″ ring
  • Feed support struts
  • Hardware
  • Base pole size 3.5 OD
  • Pole, LNB’s, Feedhorn, and Actuator not included.

Get the signal in all weather with our high quality built 2.7 meter, Performance Edition 9 foot Spun Aluminum, 4 section Satellite Dish. Made in the U.S.A. by well known DH Antenna. Specify if you require a Polar or Az EL mount when ordering. Accurate 9 foot solid reflector with tuned feed offers gain of 10 foot mesh antenna’s at a smaller size. More HOA and neighbor friendly. Detailed instructions included. Installation helpline phone support direct with DH included with your purchase.

Designed with 8 precision cut templates as ribs.

A computer controlled machine is used to manufacture the ribs allowing them to have the exact parabolic curve of the antenna. The 8 generated ribs, also referred to as templates, are secured to the antenna prior to cutting the antenna into 4 sections. The templates allow for the antenna to be re-assembled and perform as a 1 pc. Extensive testing has been done on this system and our data shows no difference from a 1pc to the 4pc. Templates hold the antenna in shape so you are assured of a perfect antenna each time.

Shipped via common shipping carrier for low shipping cost. As low as $300.00 depending on zip code.

Quality Packed and Shipped – Easy Assembly

The four sections are professionally packed and shipped. Each panel is professionally machined.

Each panel has colored numbered dots for easy perfect alignment assembly. This obtains a perfect parabolic shape for maximum gain.

Polar Mount

Connecting Sections

  • C Band Measured Gain @ 4 Ghz.: 39.6 db
  • KU Gain @ 12 Ghz.: 49.2 db
  • F/D: .33 – F/L 36″
  • 94 lbs
  • Hail resistant surface
  • Beamwidth (3.0 db) = 0.5 degrees (E-plane) 0.5 degrees (H-plane)
  • Beamwidth (10.0 db) = 0.9 degrees (E-plane) 0.9 degrees (H-plane)
  • First Sidelobe = 1.2 degrees
  • All Sidelobes > -26 db
  • Thickness: .090
  • Wind Force @ 60° @ 100 MPH: 3050 lbs.
  • 3.5″ OD pipe required. 5.5″ pipe mount optional. (extra cost)

Or give us a call Today at 509-486-4137.

NEW PRODUCT ALERT! High Gain – Low VSWR Ortho Feedhorn

Rainier Satellite is please to be carrying a new Feedhorn made in the USA. We Welcome the DH Antenna Dual C Band Feed to our product line.

Only Ortho feed Now available.
DH Antenna Commercial Feed.
Ortho Feed Requires Two (2) C-band LNBs.

High Gain Design Feed for High Gain and Excellent Rejection.
F/D .30 -.42
LOW VSWR 1.5 :1.0
Cross Pol Isolation 35db minimum
.

The Dual C-Band High Gain Feed from DH Antenna enables horizontal and vertical c-band signal simultaneously. Improves performance and can be used for multiple C-band receiver installations. No servo motor to freeze up. Great for colder climates

Precision cast-aluminum body, scalar and waveguide. Mounts to button-hook, tripod and quad leg dish supports. Cast-in f/D gauge Adjustable scalar ring.